header_top102

header_top202

header_top302

header_top402

header_top502

header_top602

header_top702

header_top802

nav_top102

nav_top202

top_nav_mbkg02

nav_top30202

nav_top402

Canít find the oil filter on your kick start Ironhead Sporty XLCH?

Well, you can stop looking because for some reason unknown to most people, the Factory neglected to provide this very necessary component on your IronHead.

What to do?

You should buy an aftermarket bolt-on oil filter kit that uses a metal enclosed oil canister filter like those found on the Evos.

Installation is easy.

Bolt on the canister bracket, usually around or on the front motor mount. If there is no "in" or "out" stamped on the unit, donít worry about it since the lines are universal. The kit always interrupts the return oil line from the engine to the oil tank.

If there are in/out markings, then the return line from the engine oil pump goes to the "in". The "out" goes from the out fitting on the oil canister bracket to the return spigot on the oil tank.

Last but not least. Mount this unit where it will be protected from unforgiving obstacles like sidewalk curbs and, of course, it is better to have the filter exposed to the wind, to aid in oil cooling

 

 

a_clearpixel right_side_bottom_image02

 

about_us contact_us copyright_footer02

nav_bottom

body_footer03

right_side_bottom02